Narragansett Bay · Rhode Island
Carved from a single slab of mahogany
Heirloom jewelry boxes hollowed from solid stock rather than assembled from panels — engraved with her name, her initials, or the word that marks the occasion.
The difference
Most boxes are built. Ours are carved.
A conventional jewelry box is six flat pieces cut, mitered, glued and clamped — with joints that open as the seasons turn. Every Treasure Works box begins as one thick slab of genuine mahogany. The compartments are machined out of the solid. The lid is machined out of the solid. There is not a single glue joint in it to fail.
01
Solid stock
One piece in, one piece out
The interior wells are machined down into a single slab, so the walls, the floor and the corners are all the same continuous piece of wood. The lid is cut from the same board and carries the same grain across the top. What you are holding began its life as one thick plank of mahogany and never stopped being one.
- Interior compartments machined from the solid
- Lid carved from the same board, grain matched
- No miters, no splines, no glue lines to open
- Hand sanded and finished to a soft satin sheen
02
Custom engraving
Her name, cut into the lid
Because the lid is one clean expanse of mahogany, there is room for a proper engraving — not a sticker, not a plate, but the wood itself cut away. A first name. A three-letter monogram. A single word that says what the day was: Bride, Grace, Always.
- A first name, in flowing script
- A classic three-letter monogram
- A date, a phrase, or a single word
- Engraving is included, never an upcharge
Three ways to make it hers
What would you like on the lid?
Tell us at checkout and it is cut into the mahogany before the box is finished and oiled.
An occasion
Bride. Anniversary. The year it happened. A word that fixes the box to a day.
A monogram
Three letters, spaced and centered in the classic arrangement. Quiet and permanent.
Her name
The most asked for, and the most personal. Set in a flowing script across the grain.
Machined from solid
Not panels glued into a box
Engraving included
Name, monogram or occasion
Made to order
Cut and finished for you
Made in Rhode Island
In a one-man shop, by hand
03
The wood
Genuine mahogany, chosen board by board
Mahogany has been the cabinetmaker’s wood for three hundred years for good reason: it is stable, it machines beautifully, and it deepens with age from warm red-brown to something close to firelight. Every slab is selected for figure before a single cut is made, so no two boxes carry the same grain.
- Stable enough to hold its shape for generations
- Color deepens and enriches with age
- Every box a different figure — yours is the only one
A jewelry box should outlive the jewelry. Ours are built to be handed down twice.
The Treasure Works standard
The collection
Boxes that have gone out the door
Each one photographed at the shore before it was packed.
Order yours
The Mahogany Slab Jewelry Box
$84.00Engraving included
One slab, one lid, one engraving of your choosing. Finished by hand and shipped in protective packing from the shop in Rhode Island.
- Hand-machined from a single mahogany slab
- Custom laser engraving on the lid, included
- Soft lining in the jewelry wells
- Finished with hand-rubbed oil
- Secure checkout
04
Where they are photographed
On a weathered rock, above a harbor full of yachts
These boxes are not photographed in a light tent. They are carried down to the shore of Narragansett Bay and set on a flat, sea-worn rock, with the moored yachts of the harbor behind them. The stone is the right company for the wood, and the harbor is the right company for both.
In their words
What buyers have written
★★★★★
My jewelry box reminds me of what my grandmother had. I miss her, this brings me back
Louise · Mobile
★★★★★
I love this, its very solid , like each bracelet I collect
Julianne· Charlestown
★★★★
This was a surprise! I was so happy to have something made by hand
Gloria · Revere
Before you order
Questions worth asking
What exactly do you mean by machined from a solid slab?
The compartments are cut down into one thick piece of mahogany, so the inside of the box is continuous wood rather than four walls glued to a floor. The lid is cut from the same board. There are no miters and no glue joints in the body of the box.
What can I have engraved on the lid?
A first name, a three-letter monogram, a date, or a single word such as Bride. Send the wording with your order and it is cut into the lid before the finish goes on.
What size is the box?
7 1/8′ x 4 3/16″ x 4″
How do I care for the finish?
Keep it out of direct sun and away from radiators, and wipe it with a dry soft cloth. A little furniture oil once a year will keep the mahogany deep and even.
One slab, one name
Choose the name that goes on the lid
Every box is made to order, so the wording is yours to decide. Tell us at checkout and it will be cut, finished and on its way.